Sublimation Solutions
GZ Australia’s sublimation printers lead the market in textile and transfer production. The Apsaras series — from the 1.8 m G2 to the 3.2 m G5 Max — combines Epson i3200 A1 printheads with intelligent IR heating for fast drying and deep colour penetration. Ideal for textile manufacturers, fashion printers, and soft signage producers, these systems deliver industrial speed, vivid output, and long-term reliability. Australia’s trusted choice for high-volume textile printing.
Apsaras G2
1.6m Single or Dual-Head Sublimation Transfer Printer
- One or two Epson i3200-A1 printheads, staggered
- 1.6m maximum print width, 200m feed and take-up
- Up to 95 sqm/h draft at 720x600dpi
- Front + rear heating for fast drying
- Auto capping and wiping system, bulk ink feed
Apsaras G4
1.95m Quad-Head Sublimation Transfer Printer
- Four Epson i3200-A1 printheads, staggered
- 1.95m maximum print width, 1000m feed / 500m take-up
- Up to 185 sqm/h draft at 360x1200dpi
- CMYK, or optional 8-colour K.C.Y.M + S1-S4
- Triple heating zones for instant fixation
Apsaras G4L
1.95m Quad-Head Sublimation Transfer Printer
- Four Epson i3200-A1 printheads, staggered
- 1.95m maximum print width, 200m feed and take-up
- Up to 185 sqm/h draft at 360x1200dpi
- 55 to 100gsm transfer paper, 150mm roll diameter
- Compact chassis with energy-efficient drying section
Apsaras G4P
1.95m Four-Head Flexible Textile Printer
- Four Epson i3200-A1 printheads with variable drop volume
- 1.95m maximum print width, direct-to-textile pigment
- KCMY + Orange, Red and Black 8-colour configuration
- Up to 148 sqm/h draft in 4-colour at 720x600dpi
- Anti-pooling platen for pigment ink wicking
Apsaras G4D Max
3.2m Hybrid Inline/Offline Sublimation System
- Four Epson i3200-A1 printheads
- 3.2m maximum print width, air-shaft feed and take-up
- Up to 110 sqm/h draft at 360x1800dpi
- Hybrid support for wall fabric, flag and 45gsm+ transfer paper
- Inline/offline drying with AI temperature controller
- Smart touchscreen interface for full control
Apsaras G5
1.95m 8-Head High-Speed Sublimation Transfer Printer
- Eight Epson i3200-A1 printheads, staggered
- 1.95m maximum print width, 2000m feed / 1000m take-up
- Up to 363 sqm/h draft at 720x600dpi
- 30 to 100gsm transfer paper, 350mm roll diameter
- Intelligent IR heating with continuous bulk ink circulation
Apsaras G5 Max
3.25m Industrial 8-Head Sublimation Transfer Printer
- Eight Epson i3200-A1 printheads, staggered
- 3.25m maximum print width, 1000m feed / 500m take-up
- Up to 403 sqm/h draft at 360x1200dpi
- 45 to 80gsm transfer paper, 350mm roll diameter
- Triple heating system, built for 24/7 production








