Replacement capping-station Cap Top for GZ DTF machines on the Epson i3200 / i1600 A1 platform. Seals the nozzle plate at rest to stop ink drying, and seats during cleaning.

For Pixy T2, T4, T5 DTF printers.

Keep the cap lip clean for a full seal; replace if damaged or corroded.

ADD TO CART

DTF Cap Top

A$22.00

  • SPECIFICATIONS

    • Type: Capping station top
    • Platform: Epson i3200 / A1
    • Compatible printers: Pixy T2, T4, T5 and Apsaras G5P

  • HOW TO USE

    1. The cap seals the nozzle plate when the head parks, so the nozzles stay wet and do not dry out. It also seats during cleaning cycles.
    2. Keep the cap lip clean - lay a soaked lint-free wipe over it for a few minutes, then wipe gently. Do not scrub, the rubber is delicate.
    3. To replace: power down, remove the old top and fit the new one so the seal just meets the nozzle plate, centred and square.
    4. Run a nozzle check and confirm the head holds overnight without drying.

    Replace it when you see:

    • The rubber seal is hard, cracked or does not spring back
    • The head dries out or loses nozzles overnight despite being capped
    • Cleaning cycles no longer improve the nozzle check
    • Crusty dried ink building up around the station

  • DETAILS

    Replacement capping-station top for the Epson i3200 / A1 platform. Looking after the cap is the easiest way to protect the head - it keeps the nozzles sealed and wet whenever the machine sits idle.

    For Pixy T2, T4, T5. Australian stock, local support.

Capping Station Top

BESTSELLERS

You may also like