60cm DTF Film (Instant Peel)

• Type: DTF transfer film (PET)
• Width: 60 cm
• Length: 100 m
• Peel: Double-sided Instant peel
• Compatible printers: Pixy T2, T4, T5 DTF

Keep the roll sealed until use. Once opened, load the film carefully into the printer and handle it by the edges only. Fingerprints, oil and dust on the print side can cause adhesion issues.

Print your design, then apply hot-melt adhesive powder evenly while the ink is still wet. Shake off all excess powder so it remains only on the printed ink.

Cure the powder, then heat press the transfer onto the garment at 160°C for 8 seconds. Peel instantly while hot, then allow the garment to rest briefly before pressing again at 160°C for 5 seconds to finish.

Best results can vary depending on garment type, ink, powder, curing and press settings. Always test before production.

Best results can vary depending on garment type, ink, powder, curing and press settings. Always test before production.

DTF transfer film on a PET base with an even matte coating for clean powder pickup and reliable release. Instant peel to maximise your workflow.

Store cool, dry and out of direct sunlight, and handle with care. Designed for Pixy T2, T4, T5 DTF Printers.

Australian stock, local support.